KINGTOP MCMMeasurement consumables
+86 188 9004 9873Get a quote

Reflective Dot Targets, inner 1.5–⁠100 mm

Forty-five reflective dot patterns: hollow rings with defined inner and outer diameters, plus 6 / 10 / 16 mm silver-core points for maximum return.

45 stock models
24 h quotation
OEM private label
Overview

These are the positioning dots a handheld scanner asks for — a retroreflective ring die-cut on a sheet sized to the pattern. Inner and outer geometry is held to the printed catalogue spec so the scanner's centroid calculation behaves.

Hollow rings let adhesive breathe and give a crisp edge; solid silver-core dots push return intensity up on dark or distant surfaces.

  • 43 ring sizes, inner 1.5–100 mm / outer 2.5–150 mm
  • Silver-core points in 6, 10 and 16 mm
  • Sheet formats listed per pattern
  • Custom die-cut sheets and rolls at bulk quantity
Fan of eight reflective dot target sheets, from small rings to large patterns
Specifications

Every stock model, in one table

Filter by model, size or thread. Rows are the stock build; custom geometry is quoted separately.

45 models
SizeConstruction & patternInner / outer mm
Ø1.5 / 2.5 mmsmall hollow ring dots, 10x5 sheet1.5 / 2.5
Ø1.5 / 3 mmhollow ring dots, 8x5 sheet1.5 / 3
Ø2 / 3 mmhollow ring dots, 10x5 sheet2 / 3
Ø2 / 4 mmsmall hollow ring dots, 11x6 sheet2 / 4
Ø3 / 4 mmhollow ring dots, 9x5 sheet3 / 4
Ø3 / 5 mmhollow ring dots, 10x6 sheet3 / 5
Ø3 / 6 mmfilled black dots, dense 12x10 sheet3 / 6
Ø3 / 6 mmhollow ring dots, dense 14x7 sheet3 / 6
Ø3 / 7 mmsmall hollow ring dots, dense 16x7 sheet3 / 7
Ø3 / 10 mmfilled black ring dots, 11x5 sheet3 / 10
Ø4 / 8 mmhollow ring dots, 13x5 sheet4 / 8
Ø5 / 8 mmgrey-center ring dots, 14x5 sheet5 / 8
Ø5 / 9 mmgrey-center ring dots, 13x5 sheet5 / 9
Ø5 / 10 mmhollow ring dots, 12x5 sheet5 / 10
Ø6 / 10 mmhollow ring dots, 9x5 sheet6 / 10
Ø6 / 10 mmhollow ring dots, 8x6 sheet6 / 10
Ø6 / 10 mmgrey-center ring dots, 12x5 sheet6 / 10
Ø6 / 10 mmsquare black frames with white square centers, 10x5 sheet6 / 10
Ø6 / 11 mmthick hollow ring dots, 9x5 sheet6 / 11
Ø6 / 12 mmblack squares with white dot centers, 8x5 sheet6 / 12
Ø6 / 10 mmblack strip sheet with white dots, 6 strips6 / 10
Ø8 / 12 mmgrey-center ring dots, 8x4 sheet8 / 12
Ø9 / 12 mmgrey-center thin ring dots, 8x4 sheet9 / 12
Ø9 / 12 mmquartered (cross-split) black/white dots, 8x4 sheet9 / 12
Ø10 / 14 mmgrey-center ring dots, 7x4 sheet10 / 14
Ø10 / 16 mmgrey-center thick ring dots, 6x3 sheet10 / 16
Ø12 / 18 mmhollow ring dots, 6x3 sheet12 / 18
Ø12 / 19 mmgrey-center ring dots, 5x4 sheet12 / 19
Ø12 / 20 mmthick hollow ring dots, 5x3 sheet12 / 20
Ø16 / 18 mmthin hollow ring dots, 4x4 sheet16 / 18
Ø16 / 25 mmthick hollow ring dots, 4x3 sheet16 / 25
Ø16 / 25 mmquartered (cross-split) dots, 5x2 sheet16 / 25
Ø16 / 28 mmgrey-center thick ring dots, 4x2 sheet16 / 28
Ø20 / 30 mmgrey-center thick ring dots, 4x2 sheet20 / 30
Ø20 / 30 mmquartered (cross-split) dots, 4x2 sheet20 / 30
Ø21 / 42 mmsingle black square target with grey ring center21 / 42
Ø25 / 35 mmhollow ring dots, 3x2 sheet25 / 35
Ø25 / 35 mmquartered (cross-split) dots, 3x2 sheet25 / 35
Ø30 / 60 mmtwo large black rings with grey centers30 / 60
Ø30 / 60 mmtwo large white rings with black centers30 / 60
Ø32 / 64 mmblack center32 / 64
Ø100 / 150 mmsingle large black ring with grey center100 / 150
Ø6 mmsheet of small silver-grey dots; type:silver core point—
Ø10 mmsheet of silver-grey dots; type:silver core point—
Ø16 mmsheet of silver-grey dots, 6x3; type:silver core point—

Dimensions are catalogue values in millimetres. Need a variant that is not listed? Send the drawing — custom diameters, threads and pack counts are available at bulk quantity.

Details

The parts, close up

Photographs from the same production run, plus the drawings we quote from.

Hollow-ring dot sheet, ten by ten grid, close up
One hundred dots per sheetDie-cut as a single sheet so the pitch survives lifting and re-seating.
Reflective dot sheets of several patterns laid out on a bench
The range, after die-cuttingRing patterns from 1.5 mm inner to 100 mm outer come off the same line.
Carton packed with dot sheets before export
Counted and cartonedThe carton is photographed before it leaves the building.
Peeling a dot from the linerFilmed at the packing bench, no retakes.
Handling

Liner release is half the job

A dot that tears on the liner is a dot the operator throws away. The liner on these sheets releases in one pull, so a mis-placed target can be lifted and re-seated without delaminating the ring.

  • Die-cut ring stays intact on release
  • Sheet keeps its pitch in the hand
  • Backing sheets and rolls for OEM lines

See the target range

FAQ

Questions buyers ask

Hollow ring or solid dot?

Hollow rings for general handheld scanning and for surfaces that need to breathe; silver-core dots where return intensity is the limiting factor.

Can you cut a custom sheet layout?

Yes — send dot size, count per sheet and backing preference; we quote custom die-cut sheets and rolls at bulk quantity.

Get a factory quote within 24 hours

Send sizes, threads and quantities — or just the scanner or tracking system you run. We answer with a specification match, MOQ and factory pricing.

Request a quote
CatalogueRequest a quote