KINGTOP MCMMeasurement consumables
+86 188 9004 9873Get a quote

Setting Up Magnetic Targets on Ferrous Parts

Field guide selection & workflow
Reflective points on a magnetic sheet, close up
Magnetic pointsThe sheet holds the pattern; the magnet holds the sheet.

Why magnetic beats adhesive in the shop

Machined parts arrive oily, warm and residue-sensitive. Adhesive lifts on oil, leaves film on datums and dies after heat cycles. Magnetic points snap on clean or oily steel, reposition during planning, and leave nothing behind.

A layout that solves first try

Spread points across the whole scan envelope, not just the region of interest; keep three or more points visible in every scanner pose; avoid symmetric layouts that let the solve flip; add a reference cube at the fixture datum so sessions merge without re-alignment.

Holding-force checks

Paint thickness, curvature and surface film all cut holding force. Tug-test each point after placement; on curved or painted surfaces use the high-gap variant or add a mechanical stop.

After the scan

Pull points straight off — no twisting on polished datums. Store cubes with their fixture so the datum returns identically next month. Wipe with a dry cloth; solvents attack the reflective shell.

StepActionCheck
1 PrepDegrease loose oil, leave filmPoint snaps flat
2 Layout3+ points per pose, asymmetricSolve does not flip
3 DatumReference cube at fixture zeroSessions merge
4 VerifyTug-test vertical facesNo slide

Browse the matching products

Get a factory quote within 24 hours

Send sizes, threads and quantities — or just the scanner or tracking system you run. We answer with a specification match, MOQ and factory pricing.

Request a quote
CatalogueRequest a quote